EKO MS-093 Instruction Manual Download Page 3

EKO INSTRUMENTS CO., LTD. Sunshine Duration Meter MS-093 Instruction Manual Ver.4 

Pg. 2 

 

2.  Important User Information 

 
Thank you for using EKO Products 
 

Make sure to read this instruction manual thoroughly and to understand the contents before starting to operate the 

instrument. Keep this manual at safe and handy place for whenever it is needed. 

For any questions, please contact us at one of the EKO offices given below:

 

 
 

2-1. Contact Information 

 

EKO INSTRUMENTS 

CO., LTD.

 

Asia, Oceania Region 

 

 

www.eko.co.jp 
[email protected] 

EKO INSTRUMETNS Co., Ltd. 
1-21-8 Hatagaya, Shibuya-ku 
Tokyo, 151-0072 Japan 

 
Tel:  +81 (3) 3469-6711 
Fax:  +81 (3) 3469-6719 

Europe, Middle East, Africa, South America Region

 

www.eko-eu.com 
[email protected] 

EKO INSTRUMENTS Europe B.V.

 

Lulofsstraat 55, Unit 32, 
2521 AL Den Haag, The Netherlands

 
Tel:  +31 (0)70 3050117 
Fax:  +31 (0)70 3840607 

North America Region

 

www.eko-usa.com 
[email protected] 

EKO INSTRUMENTS USA Inc. 
95 South Market Street, Suite 300 
San Jose, CA 95113 USA 

 
Tel: +1 

408-977-7751 

Fax: +1 

408-977-7741 

 

 

2-2. Warranty and Liability 

For warranty terms and conditions, contact EKO or your distributor for further details. 

EKO guarantees that the product delivered to customer has been verified, checked and tested to ensure that 

the product meets the appropriate specifications. The product warranty is valid only if the product has been 

installed and used according to the directives provided in this instruction manual. 

 

In case of any manufacturing defect, the product will be repaired or replaced under warranty. However, the 

warranty does not apply if: 

  Any modification or repair was done by any person or organization other than EKO service 

personnel. 

 

The damage or defect is caused by not respecting the instructions of use as given on the product 

brochure or the instruction manual. 

 

 

 

Summary of Contents for MS-093




























Reviews: