EKO INSTRUMENTS CO., LTD. Ventilation Unit MV-01 Instruction Manual Ver. 4
Pg. 9
5. Getting Started
5 - 1 . P a r t s N a m e a n d D e s c r i p t i o n s
Each part name and its main functions are described below.
Parts Names
A. Heater Unit
B. Overcurrent protection
C. Fan Unit
D. Cable Connector
E. Leveling Screws
F. Fixed foot
Figure 5-1. Parts Names
1. Heater Unit
Heater can be used together with the fan unit to increase the forced air temperature. When the instruments
are used in cold regions and/or snowy regions, turn on the heater unit to prevent snow and ice getting on the
glass dome and sun screen.
2. Overcurrent protection
Overcurrent protection is included to prevent damage due to excessive temperature rise of the heater.
* Do not operate the heater in case the ambient temperature will be over 50
℃
and the heater supply voltage
more than DC16V. Overcurrent protection may be activated and stopped to supply to the heater current.
Since the MV-01 cannot be used for snow melting, please operate the fan and heater beforehand.
The heater should be used with the fan unit.
Table 5-1. Parts Name
A
F
B
D
C
E
