11
8.Operating Instruction
Before operation, please be familiar with the function of each switch/button on the
instrument panel.
8.1 Start, run and parking:
1).Insert the key into the key switch, turn to the right,pull the emergency power safety
switch up, open the control circuit.
2).Forks rise above ground about 3.93In.
3).Open the travel switch slowly,till the requested speed
4).Any fault of the truck happening during operation, need to cut off the power immediately,
and press the red emergency power switch down.
5).Avoid take a sudden turn during driving the truck.
6).Using truck Full load climbing a slope, need to know the condition of the slope, and press
the travel switch as much as possible to get a maximum grade ability.
7).When stop driving,put the fork in the bottom,press the emergency switch down, and pull
out the key.
8.2The usage of emergency safety switch
Press t
he emergency safety switch down,then the the truck’s power off. Method to open
it:pull the red button up.
Emergency safety switch is made of plastic, too much pressure may damage it.
8.3 The usage of horn button.
Press the horn button in the center of handle to notify people around.
Summary of Contents for EP18LI Series
Page 12: ...9 6 Electrical Schematic Diagram...
Page 13: ...10 7 Hydraulic Schematic Diagram...
