Page 5
Configuration and commissioning
Configuration and commissioning of the device require
the use of the ETS
®
(Engineering Tool Software)
program V4 or later releases. These activities must be
carried out according to the design of the building
automation system done by a qualified planner.
Configuration For the configuration of the device
parameters the corresponding application program or
the whole ekinex
®
product database must be loaded in
the ETS program.
For detailed information on configuration options, refer
to the application manual of the device available on the
website
Product code
Application software
(## = version)
Communi-
cation
objects
(max nr.)
Group
adresses
(max nr.)
EK-HA1-TP
APEKHA1TP##.knxprod
45
254
EK-HB1-TP
APEKHB1TP##.knxprod
45
254
EK-HC1-TP
APEKHC1TP##.knxprod
63
254
Note. The configuration and commissioning of KNX
devices require specialized skills. To acquire these
skills, you should attend the workshops at KNX
certified training centers.
Commissioning
For commissioning the device the following activities
are required:
• make the electrical connections as described above;
• turn on the bus power supply;
• switch the device operation to the programming
mode by pressing the programming pushbutton
located on the front side of the housing. In this
mode of operation, the programming LED is turned
on;
• download into the device the physical address and
the configuration with the ETS
®
program.
At the end of the download the operation of the device
automatically returns to normal mode; in this mode the
programming LED is turned off. Now the bus device is
programmed and ready for use.
Dimensions [mm]
(All versions)
Marks
the device complies with the Low Voltage
Directive (2006/95/EC) and the
Electromagnetic Compatibility Directive
(2004/108/EC).
Tests carried out according to
EN 50491-2:2010, EN 50491-3:2009,
EN 50491-4 - 1:2012, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 50428:2005
+A1:2007 + A2:2009
Maintenance
The device is maintenance-free. To clean use a dry
cloth. It must be avoided the use of solvents or other
aggressive substances.
Disposal
At the end of its useful life the product described in this
datasheet is classified as waste from electronic
equipment in accordance with the European Directive
2002/96/EC (WEEE), and cannot be disposed together
with the municipal undifferentiated solid waste.
Warning! Incorrect disposal of this product may cause
serious damage to the environment and human health.
Please be informed about the correct disposal
procedures for waste collecting and processing
provided by local authorities.
Documentation
This datasheet refers to the release A1.0 of the ekinex
®
devices EK-HA1-TP, EK-HB1-TP and EK-HC1-TP, and
is available for download at www.ekinex.com as a PDF
(Portable Data Format) file
.
Filename
Device release
Updating
STEKHx1TP_EN.pdf
A1.0
01/2016
Warnings
• Installation, electrical connection, configuration and
commissioning of the device can only be carried out
by qualified personnel in compliance with the
applicable technical standards and laws of the
respective countries
• The use of the device in security applications is not
allowed. The device may however be used for
auxiliary signaling functions
• Opening the housing of the device causes the
immediate end of the warranty period
• In case of tampering, the compliance with the
essential requirements of the applicable directives,
for which the device has been certified, is no longer
guaranteed
• ekinex
®
KNX defective devices must be returned to
the manufacturer at the following address: EKINEX
S.p.A. Via Novara 37, I-28010 Vaprio d’Agogna
(NO) Italy Other information
• This datasheet is aimed at installers, system
integrators and planners
• For further information on the product, please
contact the ekinex
®
technical support at the e-mail
address: [email protected] or visit the website
www.ekinex. Com
• KNX
®
and ETS
®
are registered trademarks of KNX
Association cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to
this documentation without notice.
90
72
DQE
K
HC1
TP
