Application manual
Presence detectors KNX EK
-
Dx2
-
TP (x = B, C, D, E)
Release 1.01
-
Update: 05/2014
MAEKDx2TP_EN
© SBS S.p.A.
–
All rights reserved
Page 31
6.5.6
Object 22 Constant light control channel 1
–
Output
Output
-
1 Byte
This communication object is used to control the dimmer actuator for channel 1 through an absolute dimming
command.
6.5.7
Object 23 Constant light control channel 2
–
Output
Output
-
1 Byte
This communication object is used to control the dimmer actuator for channel 2 through an absolute dimming
command; the dimming value is the same value sent for channel 1 corrected by the application of the offset
defined through parameter
Offset channel 2
.
6.5.8
Object 24 Light
-
standby
Input
-
1 Bit
This object defines which of the two available value pairs for the standby condition are in effect (see also
section 5.3,
Standby values
).