background image

 

EK-WL8-SND/AU 

WIRELESS SOUNDER  

STFV.425412.001-AU-UM rev. 20

 

20.07.2021 

Page 6 from 8 

 

WARRANTY 

All devices are covered by a 3-year limited warranty (does not apply to batteries). 
The  warranty  is  voided  by  mechanical  or  electrical  damage  caused  by  incorrect 
handling or usage. Product must be returned via an authorized supplier for repair 
or replacement along with full information on the identified problem. 

BATTERY REPLACEMENT

 

When  a  battery  requires  replacement,  both  batteries  must  be  changed 
together. 

 

a.  Open the case of the device.  
b.  Remove the batteries. 
c.  Insert the new  batteries  as  detailed in  the installation manual  above 

– take 

care to o / - polarity.  

d.  Close the case of the device. 
e.  Test the device in accordance with the 

manufacturer’s instructions. 

It is recommended to change both batteries after 10 years of operation regardless 
of their indicated discharge level. 

To replace the batteries, use Panasonic CR123A (primary and secondary batteries) 
or  other  with  similar  characteristics.  The  batteries  must  meet  the  following 
standards: UL 1642 lithium batteries,  UL certified at 

www.ul.com

  or IEC  60086-4 

Primary batteries, Part 4: Safety of lithium batteries. 

The remaining shelf time of the new batteries must be not less than 8 years.  

Failure to observe these instructions will void the device warranty and any liabilities. 

CAUTION 

-  Replacement of a batteries must be of the same type. 
-  Do  not  expose  used  batteries  to  fire,  hot  ovens,  or  mechanical  crushing/ 

cutting as this can result in an explosion. 

-  Exposing batteries to extremely high environmental temperatures can result 

in explosion or the leakage of flammable liquid or gas. 

-  A battery subjected to extremely low air pressure may result in an explosion or 

the leakage of flammable liquid or gas. 

DISPOSAL  

-  Follow local regulations regarding disposal of the batteries 

Summary of Contents for EK-WL8-SND/AU









Reviews: