ekco EV55SE, User Manual, Page: 8 / 12

THE REMOTE HANDSET
Installing Handset Batteries
Remove the bottom cover of the handset. The batteries sit in a
cradle in the handset. Carefully lift up the cradle making sure not to
damage the connecting wires. Place two AAA batteries in the
cradle and then return the cradle to the handset. The batteries
should be inserted with the polarities as shown in the drawing and
the cradle should be inverted (ie with the batteries facing down)
Now replace the cover
Point the handset away from the amplifier and press a button. the
indicator on the handset will flash if the batteries are correctly
connected.
Adjusting the Volume with The Handset
Point the handset directly at the amplifier front panel. Press the Volume
+/–
buttons to
increase or decrease the volume.
Muting the Volume
Point the handset directly at the amplifier front panel. Press the Mute button. The amplifier
volume will be muted. Press the mute button again to restore the volume.
After Use
Turn the Volume control down and then switch the amplifier off.
Mute Button
Volume UP Button
Volume Down Button
Indicator Light
8