ekco EV55SE User Manual Download Page 11

Care And Cleaning

The surface of the equipment may be cleaned with a damp cloth provided that the power
has been removed

Solvent based cleaning materials should never be used as they may

damage the paint

If dust accumulates in the slots in the covers, brush them out with a

soft brush before cleaning the unit.

Product Warranty

Your Ekco equipment is guaranteed against any defect in material and workmanship for a
period of one year from the date of purchase with the exception of the valves, which are

warranted for three months. Within the warranty period we will undertake replacement of
defective parts free of charge provided that the failure was not caused by misuse, accident

or negligence. Your statutory rights within the territory in which you purchased the

equipment are not ected by this warranty.

If your equipment requires servicing (including valve replacement) you should return it to
the dealer from whom the equipment was purchased.
If you are abroad and there is no suitable dealer in your area, please contact the distributor
for the country in which it was purchased.
It is user's responsibility to ensure that all equipment for service is returned carriage paid

and in the original packaging. Enclose a brief note with your name and address and the
reason for returning the equipment.

International Service Centres

UK:

International Audio Group Service Centre, Unit 4, St Margaret’s Way, Stukeley Meadows

Industrial Estate Huntingdon, Cambs, PE29 6EB
Tel:+44 (0)1480 447700 Fax: +44 (0)1480 431767

Asia:

IAG Sales and Service Centre, Jiuwei Village, Xixiang Town, Shenzhen, China 518102.

Tel: +86-755-27484491 Fax:+86-755-29651484

Specifications

Valves:

4 x KT88: 1 x 12AX7: 4 x 12AU7

Output Power:

THD :
Hum and Noise:

Dimensions:

(D) 410mm x (W) 350mm x (H) 190mm

GrossWeight:

28kg

IAG reserves the right to adjust the

and performance from time to time.

Service Information

Ultralinear Mode:

55w/8Ω

Triode Mode:

28w/8Ω

Input

Frequency response:

20Hz to 30KHz±1dB

Sensitivity:

Ultralinear Mode:

300mV RMS for 55w/8Ω (Max FB)

Triode Mode:

300mV RMS for 28w/8Ω (Max FB)

 1%  at  1kHz

Ultralinear  Mode / Triode Mode

Ultralinear Mode:

>90dB 55w/8Ω (Max FB)

Triode Mode:

>90dB 28w/8Ω (Max FB)

11

Summary of Contents for EV55SE













Reviews: