Ekars EPA-2403, Operating Manual, Page: 7 / 12

Installation of The Speaker
6
Before you connect the speaker, remove the power cord from the power
outlet and switch the EPA-2403 power switch off. When connecting the
speaker wires to the SPEAKER OUTPUT terminals, use the output
terminals that are suitable for the speaker (see above figure 1-4).
Extreme care must be exercised when connecting to these terminals as
potentially hazardous voltages may be present.
NOTE : Do not exceed the power rating of the amplifier by connecting
more speakers than the unit is rated for. If you are in doubt,
please consult a professional installer
OUTPUT RMS 400W OUTPUT RMS 400W
COM 4
Ω
(40V)
8
Ω
(56.6V) (12.3 )
Ω
(25 )
Ω
70V 100V
OUTPUT RMS 400W OUTPUT RMS 400W
COM 4
Ω
(40V)
8
Ω
(56.6V) (12.3 )
Ω
(25 )
Ω
70V 100V
OUTPUT RMS 400W OUTPUT RMS 400W
COM 4
Ω
(40V)
8
Ω
(56.6V) (12.3 )
Ω
(25 )
Ω
70V 100V
OUTPUT RMS 400W OUTPUT RMS 400W
COM 4
Ω
(40V)
8
Ω
(56.6V) (12.3 )
Ω
(25 )
Ω
70V 100V
With Matching
Trans
With Matching
Trans
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
SPEAKER
OUTPUT
FOR 4 LINE Ω FOR 8 LINE Ω
FOR 70V LINE FOR 100V LINE
4 Ω 8 Ω
or
8 Ω
4 Ω
8
Ω
4
Ω
or
(Figure 1) (Figure 2)
(Figure 3) (Figure 4)