Ekars EPA-1200, Operating Manual, Page: 5 / 12

SAFETY INTRODUCTION
4
11. Grounding or Polarization
Precautions should be taken so that the grounding or polarization means of
appliance is not defeated.
Mounting in a Rack
If multiple high-power amp units are mounted in a rack with pour ventilation,
the heat from the amps will cause the interior of the amp to became very hat,
causing the performance of the amps to be impaired. In particular, when
monition in a rack whose back can be left open, mount according to the
following instruction.
12. Rack
Leave a gap of 10 cm or more between the rear panel of the rack and the rear
panel of the amplifier.
13. Mounting
Install the fan kit on the top slot or the top panel of the rack and install a blank-
ing panel between two amps.
14. Cleaning
The appliance should be cleaned only as recommended by the Manufacturer.
15. Object and Liquid Entry
Care should be taken so that object do not fall and liquids are not spilled
into the enclosure through openings.
16. Power Lines
An outdoor antenna should be located away from power lines
17. Damage Requiring Service
The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged : or
B. Objects have fallen, or liquid has been spilled into the appliance : or
C. The appliance has been exposed to rain : or
D. The appliance does not appear to operate normally or exhibits a marked change in
performance : or
E. The appliance has been dropped : of the enclosure damaged
18. Servicing
The user should not attempt to service the appliance beyond that described in the
operating instruction