20
Touching “
” displays the “summary” screen (Fig. 21); touching it again, enables the cooking cycle. The
following are displayed at the top-right of the screen: the actual temperature in the cooking chamber and
the actual temperature of the core probe. The “
” symbol is on the left of the screen and the “
”
symbol is in the centre. The “summary” screen contains all parameters and functions that can be set for
each cooking step. By selecting each individual parameter, you can edit the set value at any time; simply
touch the symbol of the desired parameter: a window appears indicating the parameter and its set value.
The new value can be set by sliding the finger or turning the knob; touching the “
” symbol in the
window automatically confirms the value and the window goes back to “summary” screen mode; vice-
versa, if the “
” symbol is touched the new parameter value is not confirmed and the previous value
remains active. Bottom-left of the “summary” screen has the symbol “
” which allows to go back to
the previous screen, while bottom-right has the symbol “
” which allows stopping the cooking cycle.
2.11 Cooking cycle with “Pre-heating” function
The “Pre-heating” function can be set before or after setting the cooking cycle parameters. It can be set in
both “Simplified” or “Advanced” mode.
Simply touch the “
” symbol at the top-left of the “Parameters” screen: a window appears indicating the
“Pre-heating” function symbol
and the symbol of the switch not
enabled (
). Touching the switch enables the function (
); touching it again, disables it. Touching
the “
” symbol on the window automatically confirms the function and the window goes back to show
the “Parameters” screen; vice-versa, if the “
” symbol is touched, the function is not confirmed. The
window still goes back to “Parameters” screen mode.
The “Pre-heating” function cannot be enabled together with the “delayed” start.
2.12 Cooking cycle with “Maintenance” function
The “Maintenance” function can be set before or after setting the cooking cycle parameters. It can be set
in both “Simplified” or “Advanced” mode.
Simply touch the “
” symbol at the top-left of the “Parameters” screen: a window appears indicating the
“Maintenance” function symbol
and the symbol of the switch not enabled (
). Touching the
switch enables the function (
); touching it again, disables it. Touching the “
” symbol on the window
automatically confirms the function and the window goes back to show the “Parameters” screen; vice-
versa, if the “
” symbol is touched, the function is not confirmed. The window still goes back to
“Parameters” screen mode.
2.13 Cooking cycle with “Postpone” function
The “Postpone” function can be set before or after setting the cooking cycle parameters. It can only be set
in “Advanced” mode.
Simply touch the “
” symbol at the top-left of the “Parameters” screen: a window appears indicating the
“Postpone” function symbol
. The time value (in hours and minutes) for the “delayed” start of the
cooking cycle is set by sliding your finger, up or down, on the “number” next to the symbol, to the desired
value. Touching the “
” symbol on the window automatically confirms the function and the window goes
back to show the “Parameters” screen; vice-versa, if the “
” symbol is touched, the function is not
confirmed. The window still goes back to “Parameters” screen mode. The “Pre-heating” function cannot
be enabled together with the “Postpone” function.
Summary of Contents for MILLENNIAL MKF 1011 CTS
Page 44: ...43 REV 4 ...
