![eka KF 1001G Use And Instruction Manual Download Page 12](http://html.mh-extra.com/html/eka/kf-1001g/kf-1001g_use-and-instruction-manual_2373665012.webp)
_TECNOEKA Srl___________________________________________________________ use and instruction manual _
_ page 12 _________________________________________________________________________________________
B)
Electrical parts (Thermostats, fan reversing motor, switch, and door microswitch)
-
Remove the door on the right panel of the oven.
-
Detach the electrical cables connected to the part.
-
Replace the part, refitting in reverse order.
N.B.: When replacing the thermostats, take care over the capillary tubes and bulbs
which must be positioned in their seats.
3.6
3.6
3.6
3.6 Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
A)
Oven not igniting. Possible causes:
-
No electrical power supplied.
-
Electrical cables detached.
-
Safety thermostat was tripped or is faulty.
B)
Burner not igniting or going off. Possible causes:
-
The ignition electrode is not correctly fastened, is badly connected or the cable is
damaged.
-
Power cable polarity incorrect. Change over the neutral and phase wires of the plug.
-
Faulty gas valve.
-
Insufficient pressure in gas pipes.
-
Injector obstructed.
-
Burner outflow holes obstructed.
-
Work thermostat faulty.
-
Electrical cables detached.
-
Oven door not shut.
C)
Fan not turning. Possible causes:
-
The motor’s safety thermal breaker was tripped.
-
Electrical cables detached.
-
Faulty condenser on motor.
-
Faulty inverter on motor.
-
Motor fan locked.
-
Oven door not shut
.
D)
Temperature cannot be adjusted. Possible causes:
-
Work thermostat is faulty.
-
Thermostat bulb damaged.
3.7
3.7
3.7
3.7 Thermal safety device
Thermal safety device
Thermal safety device
Thermal safety device
The oven is supplied with a manually resetting safety thermostat to protect against excessive,
dangerous temperatures which could be accidentally generated inside the oven. If tripped, the
device cuts out electrical power supply to the appliance. To access this device, remove the door
on the oven right panel, and reset by pressing the red push-button low down on the left of the
components compartment.