ITS Partner O.B.S S.L. Av. Cerdanyola 79-81 Local C
08172 Sant Cugat of the Vallés Barcelona (Spain)
12
TR 1300 USER MANUAL
Setting the Repeater mode.
•
Repeater settings:
o
Select Network: We must select the network band that we are going to repeat either 2G
or 5G.
o
Repeater SSID: We select the SSID we want to repeat. We can use the SCAN button to
search the network thanks to graphical interface and select it.
o
Lock BSSID: You can close by MAC the configuration of the repeater. In this way if
another issuer is configured with the SSID to repeat, not having the same MAC that we
have blocked does not make the link.
o
Encryption: Allows us to select the encryption mode or set it free if desired.
o
Password: Allows us to configure the password for the selected SSID.
o
Bandwidth: The desired bandwidth is configured, depending on the network we choose
(2G or 5G) we can select some values or others.
o
P2P: Allows you to propagate WDS configuration between terminals (It is recommended
to disable it).
•
LAN network configuration:
o
IP mode:
▪
Static IP: A management IP is configured statically.
▪
Get IP from AC: The management IP is given by an EK controller.
▪
Get IP from the gateway: The management IP is given by the Router installed
on the client.
o
Lan IP: We set the desired static IP. Only in "static IP" IP mode.
o
Subnet: We put the mask for the management IP. Only in "static IP" IP mode.
o
Gateway: We select the gateway of the computer. Only in "static IP" IP mode.
o
Primary DNS: The primary "Domain Name System" is selected. Only in "static IP" IP mode.
o
Secondary DNS: The secondary "Domain Name System" is selected. Only in "static IP" IP
mode.
