- 10 -
CLAMP
INLET
INLET
INLET
OUTLET
OUTLET
OUTLET
BARB
CLAMP
BARB
OUTLET
STEP 4
INSTALLING THE FITTINGS
Carefully identify the direction of the flow in your circuit. For the
non-rack version, EK recommends the use of EK-HFB 10 mm barb
fittings and EK-Tube ZMT 10/16 mm Matte Black tubing. For the rack
version, EK-HFB Fitting 6 mm G1/8 and EK-Tube ZMT 6/9mm Matte
Black tubing is recommended.
With EK-Pro CPU non-rack water blocks, it is mandatory to use the
port in the center of the water block as the inlet port. For the rack
version, the inlet port is on the right on both sides. Mixing the ports
may result in lesser thermal performance of the water block.
STEP 4
