www.eklights.com
TABLE OF CONTENTS
SAFETY
DIMENSIONS
DESCRIPTION
INTRODUCTION
POWER LINKING
PHOTOMETRICS
01
02
03
03
05
05
General Instructions
All work must always be carried out by qualified technical personnel. Contact the nearest sales point
for an inspection or contact the manufacturer directly.
SAFETY
Before carrying out any operations with the unit, carefully read this instruction
manual and keep it for future reference. It contains important information about the
installation, usage and maintenance of the unit.
WARNING
01
TECHNICAL SPECIFICATIONS
08
FUNCTION MENU
09
MENU DESCRIPTION
10
DMX CHANNELS
12
TROUBLESHOOTING
17
DMX CONNECTION
06
GOBO MOUNTING AND REPLACEMENT
07
The products referred to in this manual conform to the European Community Directives.
Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual.
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1).
This unit is not for home use, only professional applications.
Never use the fixture under the following conditions:
-in wet conditions;
-
in places subject to vibration;
-in places with an ambient temperature of over 45
°
C
Make certain that no inflammable liquids, water or metal objects enter the fixture.
If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal
Warnings and installation precautions
If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void.
Before starting any maintenance work or cleaning the projector, cut off power from the main suply.
Always secure the projector with safety rope when mounting. When carrying out any work, always comply
scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which
the fixture’s being used.
For inside use only. Not designed for outside use.
The minimum distance between the fixture and surrounding walls must be more than 50cm and the
air vents at the housing must not be covered.
Install the fixture in a well ventilated place
Keep
any inflammable material at a safe distance from the fixture.
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady
state, is high. After power off, please cool down over 15 minutes.
Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light,
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
Summary of Contents for E3 Spot Show Pro
Page 1: ...E3spot USER MANUAL...
Page 20: ......
