EK E3 Spot Show Pro, User Manual

Page: 12 / 20

www.eklights.com
MENU
MENU DESCRIPTION
DMX Function
DMX Address : Set DMX sarting address at a value between 001-512
DMX Channels : Select DMX mode 15/18/23 channel operation
Motor Setup
2. Pan/Tilt motor offset (for fine tuning pan/tilt position)
Adjustments to motor offsets should be made when selected function is at home (DMX = 0) position
Display Setup
1. Display Setting: Set delay time for OLED display to go dark after 10, 20 or 30 seconds or choose always ON.
System Setup
1
.
White Balance : Adjust RGB (125-255) levels to achieve desired white light
2
.
Dimmer Mode: Four selectable dimmer curves: OFF Dimmer 1, 2, 3 (fast, medium, slow )
3
.
FAN Setting
：
Select the desired fan speed: High or Auto
4
.
Factory Reset: Restore factory settings
1
.
Auto Test Mode: Test all functions automatically .
2
.
Manual Test Mode Test each function manually.
Note: No controller required to run tests
Test Setup
Self-inspection Mode:
Fixture Information
Displays fixture run time, software version and temperature.
MENU DESCRIPTION
1. Pan/Tilt inverse on/off selection
3. Gobo / Prism / Focus motor offset (for fine tuning positions)
2. Display Inverse: Select orientation of menu display
3. Warning: Display error codes
11 10
5 Test Setup
Auto Test Auto Test …
Manual Test
Pan 000-255 Default ：
Tilt:=128
Dimmer=255
Shutter = 255
Pan Fine 000-255
Tilt 000-255
Tilt Fine 000-255
Pan/Tilt Speed 000-255
Dimmer 000-255
Shutter 000-255
Red 000-255
Green 000-255
Blue 000-255
White 000-255
Gobo 000-255
R Gobo 000-255
Prism 000-255
R Prism 000-255
Focus 000-255
6 Reset Setup
Auto Reset
No
Yes Yes: Reset allChannels
Manual Reset
Pan Reset
No
Yes
Tilt Reset
No
Yes
Gobo Reset
No
Yes
Prism Reset
No
Yes
Focus Reset
No
Yes
7 Information
Fixture Time 0-9999 Default : 0
Software Version
DISP V1.0
CTR-XY V1.0
CTR-LED V1.0
LED Temperature 58°C