EN
Timeshift for recording: when enabled, allows to record videos using the timeshift
modality.
Safely remove the USB device: select the connected USB drive and press OK to safety
remove the drive.
TIMESHIFT
The Timeshift function enables to pause and playback television programmes, thanks
to the USB drive connected to the USB port of the device.
1. Ensure the USB drive is connected to the device.
2. Access the PVR setting and enable the Timeshift function (it is disabled by default).
3. Press the PAUSE button on the remote control to pause the programme.
4. Control playback using the buttons on the remote control:
Press the left and right arrows to select the starting point of the playback, then confirm
by pressing the OK button.
Press PAUSE to pause playback.
Press REW and FWD to fast forward or rewind the playback.
Press STOP to stop the Timeshift and continue watching the programme.
Reminder:
It is recommended to use a USB 2.0 drive.
USB drives with lower parameters may not be compatible with the device.
High-capacity USB drives may need an external power supply.
RECORDING:
Reminder:
-Use the Time function to programme a recording.
1. Ensure the USB drive is connected to the device.
2. While watching a programme press the REC button on the remote control to start
recording (press the REC button twice to change the recording time set by default).
3. To stop recording, press the STOP button on the remote control and a confirmation
window will appear, select [OK] to stop recording or [NO] to continue recording.
4. Recordings will be saved to the USB drive and will be available in the Multimedia
Player.