- 8 -
For this step, you will need:
Phillips Head Screwdriver
PREPARING THE MOTHERBOARD
STEP 1
Important! Before starting, make sure to have a clean, flat
surface to work on. It is recommended that you put a foam
or a soft material to lay the motherboard and the water
block on.
STEP 1
Remove three (3) screws M2 x 5 from the front of the motherboard.
Turn over the motherboard and unscrew six (6) screws M2 x 10.
Remove the backplate and front audio cover.
M2 x 2.5
SCREW (3x)
M2 x 10
SCREW (6x)
