This product is intended for installation only by expert users.
Please consult with a qualified technician for installation. Improper
installation may result in damage to your equipment. EK Water
Blocks assumes no liability whatsoever, expressed or implied,
for the use of these products, nor their installation. The following
instructions are subject to change without notice. Please visit our
web site at www.ekwb.com for updates. Before installation of this
product please read important notice, disclosure and warranty
conditions printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Please carefully read the manual thoroughly before beginning
with the installation process!
Please remove your motherboard from the computer to
assure safest mounting process in order to prevent any
possible damages to your CPU and/or motherboard’s circuit
board (PCB).
The EK- Fittings require only a small amount of force to
screw them firmly in place since the liquid seal is ensured by
the rubber o-ring gaskets.
The use of quality, market proved corrosion inhibiting
coolants is always strongly recommended for any liquid
cooling system.
