15
Chapter2SettingUp
En
gli
sh
5.
Turn on the AC adapter main power.
-: On, ○: Off
6.
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
ConnectingtotheMonitor
ConnectingtoaComputer
7.
Touch to turn on the monitor.
The monitor’s power indicator lights up green.
8.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “Chapter 3 Troubleshooting” (page 17) for additional advice.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the AC adapter main
power switch or unplugging the power cord completely shuts off power supply to the monitor.
Note
• In order to maximize the monitor life and to minimize luminance deterioration as well as power consumption, proceed the
following:
-
Use the power saving function of the computer.
-
Turn off the monitor and PC after using them.
2-3. Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of the screen to
the best condition for working.
Attention
• Be sure that the cables are correctly connected.
