12
Chapter 1 Introduction
1-3. Controls and Functions
4
3
12
13
2
1
10
7
9
5
15
14
6
8
11
Approx. 30°
1. Integrated Front Sensor
(Movable)
This sensor is used to perform calibration and Grayscale Check.
2. Ambient Light Sensor
This sensor measures environmental illumination. Environmental illuminance
measurement is performed using the RadiCS / RadiCS LE quality control software.
3. Presence Sensor
This sensor detects movements made by a person in front of the monitor.
4. Operation switches
Displays the operation guide. Set menus according to the operation guide.
5. switch
Turns the power on or off.
The switch indicator is lit when you turn the power on. The indicator color differs
depending on the monitor's operation status.
Green: Monitor in operation, Orange: Power saving mode,
Off: Main power / power off
6. USB upstream port
Connect this port to the PC when you use software that needs a USB connection or
connect a USB device (peripheral device that supports USB) to the USB downstream
port.
7. DVI-D connector
Connect it to the PC.
For more information, see “2-2. Connecting Cables” (page 14).
8. DisplayPort input
connector
9. DisplayPort output
connector
To set up a daisy-chain connection, connect the cable to the DisplayPort input
connector of another monitor.
For more information, see “2-2. Connecting Cables” (page 14).
10. Power connector
Connects the power cord.
11. USB downstream port
Connect it to a USB device. To set up a daisy-chain connection, connect the cable to
the USB upstream port of another monitor.
For more information, see “2-2. Connecting Cables” (page 14).
12. Stand
Adjusts the height and angle (tilt and swivel) of the monitor.
13. Main power switch
Turns the main power on or off.
: Off, : On
14. Security lock slot
Complies with Kensington’s MicroSaver security system.
15. Cable holder
Holds the monitor cables.
