1
2. Cable Connection
-. Single Link Cable Connection
NOTE
•
Be sure that the power switches of both the PC and the monitor are OFF.
•
Refer to the PC user's manual when connecting the monitor.
•
Before a 10bit color signal can be input, your graphics board must configured. For
details, refer to the user's manual for the graphics board.
1
Rotate the monitor ninety degrees clockwise into the portrait position.
2
Connect the signal cable to the DVI-D input connector on the rear of
the monitor and to the video output connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Signal Cable
Connector on PC
PC
Signal cable (DD200DL-BK)
Video Output Connector / DVI Exclusive graphics board
3
Connect the power cord to the power connector on the rear of the
monitor.
Signal cable
DD200DL-BK
Power cord
Summary of Contents for RadiForce RX320
Page 48: ......
