background image

38

Chapter6Reference

 

To set input signal selection <Input Signal>

Setting

Function

Auto

ThemonitorrecognizestheconnectorthroughwhichPCsignalsare
input.
WhenaPCisturnedofforentersthepower-savingmode,themonitor
automaticallydisplaysanothersignal.

Manual

ThemonitordetectsonlythePC’ssignalscurrentlydisplaying
automatically.Selectanactiveinputsignalwith .

Procedure

1.  Choose <Others> from the Adjustment menu, and press  .
2.  Choose <Input Signal> from the <Others> menu, and press  .

The <Input Signal> menu appears.

3.  Select “Auto” or “Manual” with   or  .
4.  Press   to exit the adjustment.

Note

•  When “Auto” is selected for <InputSignal>, the monitor’s power-saving function works only when all PCs are in the 

power-saving mode.

6-4.  Displaying Monitor Information <Information>

This function allows you to display the input signal status, current resolution and model name.

Information 1/3: Input signal status, resolution, and horizontal/vertical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage time

Procedure

1.  Choose <Information> from the Adjustment menu, and press  .

The <Information> menu appears.

2.  Then, press    to check settings, etc.

Attention

•  The usage time is not always “0” when you purchase the monitor due to factory inspection.

Summary of Contents for RADIFORCE MS230W



























































Reviews: