background image

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

 

 

When attaching an arm stand, please refer to the user's manual of the arm 
stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to come unattached, which may result in injury or 
equipment damage. When the unit is dropped, please ask your dealer for advice. Do 
not continue using a damaged unit. Using a damaged unit may result in fire or 
electric shock. When reattaching the tilt stand, please use the same screws and 
tighten them securely.

 

 

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some 
physical symptoms result, please consult your doctor.

 

 

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

 

 

 

 

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with 
the cord attached is dangerous. It may result in injury.

 

 

When handling the unit, grip the bottom of the unit firmly with both hands 
ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

 

Summary of Contents for FlexScan S2410W


























































Reviews: