E
25
1
INSTALLATION
(4)Plug the signal cable (which is marked “LCD”) into the D-Sub
connector (Signal 1) at the rear of the monitor. Please ensure that the
arrow mark on the casing of the connector is visible when connecting.
See note.
When connecting the signal cable, check that the shape of the cable
connector matches the shape on the LCD monitor.
(5)Replace the D-Sub connector holder and hand-tighten the screw.
(6)Place the bracket on the rear of the LCD monitor. Fix the bracket to
the rear of the LCD monitor securely. Place and fix a mount or an
arm-stand to the monitor.
•
In case of using this LCD monitor with an arm-stand in an office
workspace, the arm-stand shall be chosen and used carefully:
- Use only an approved arm-stand (e.g. GS).
- The arm-stand shall have sufficient stability (mechanical firmness)
to support the weight of the monitor including the recommended
optional parts (minimum support is 9.0 kg).
-The arm-stand shall remain in that position where it is manually
moved.
- The arm-stand shall have the ability to tilt the monitor forward and
backward.
