Eizo DURAVISION FDV1001, User Manual

Page: 12 / 24

11
Chapter 2 Assembly
● How to assemble
ATTENTION
• This monitor can be attached to a 19-inch rack compliant with the EIA standards
*1
.
Universal pitch Wide pitch
15.875(0.63)
31.75(1.25)
31.75(1.25)
15.875(0.63)
12.7(0.5)
12.7(0.5)
12.7(0.5)
450(17.7)
12.7(0.5)
15.875(0.63)
15.875(0.63)
465.1(18.3)
. . . . . .
Dimensions of rack mounting holes
unit : mm (inch)
*1
EIA standards: Standards concerning sizes of racks and devices to be stored in the racks specified by Electric Industries Association
(EIA)
1. Attach the two handles from the front and secure them from the rear using handle mounting
screws (M5 × 10 mm: 4 pcs.).
Handle
2. Attach the monitor to the rack while holding the handles on both sides and then secure the
monitor using screws.
Rack
ATTENTION
• Screws for attaching the monitor to the rack are not included with this monitor. Prepare screws suitable for your
rack.
• Refer to the User’s Manual for the rack regarding the procedure to attach the monitor to the rack.
• Handles should be used to support the monitor during installation. Do not pull the handles on occasions other than
installation.