5
Chapter 1 Basic Adjustment / Setting
1-2. Switching Input Signals
Select the signal input to the monitor and display it on the screen.
1.
Press (INPUT).
The “Input Select” menu appears.
For other than 2D or 3D mode SIMUL
2.
Press to select an input signal.
This switches to the selected input signal.
3.
Press (INPUT).
The menu screen exits.
Attention
• In 3D mode, input signals other than SDI and DVI cannot be selected.
Note
• If you press
(INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu
of the subscreen is displayed.
• When RGB / YP
B
P
R
is selected, if the color is abnormal, set it correctly with
on the main
menu.
• The “Input Select” menu will disappear after five seconds have elapsed if no operation is performed.
