5
Chapter 1 Basic Adjustment / Setting
1-2. Switching Input Signals
Select the signal input to the monitor and display it on the screen.
1.
Press (INPUT).
The “Input Select” menu appears.
2.
Press to select an input signal.
This switches to the selected input signal.
3.
Press (INPUT).
The menu screen exits.
Note
•
When selecting SDI, SDI 1 to SDI 4 can be selected using the
buttons.
•
If you press
(INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu
of the subscreen is displayed.
•
The Input Select menu will display for 7 seconds without input before it disappears.
1-3. Using Function Buttons
Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5
(
)). For information on how to set a function to each button, see
1.
Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).
When the function menu is displayed, the function associated with the button that is pressed will run.
Note
•
In dual screen mode, press (INPUT) to select a screen for performing the target function.
•
When the function button for a function that cannot be run is pressed, the message “Invalid Function” will appear.
•
When the function button that has not yet been defined is pressed, the message “Undefined” will appear.
