8
Chapter 2 Advanced Adjustment / Setting
●
System Config
Settings for devices.
Function
Setting range
Description
SDI 4K
Auto
SQUARE
INTERLEAVE
Sets the signal format.
•
“Auto”
SQUARE or INTERLEAVE are automatically detected.
•
“SQUARE”
Treats as Square Division (SQD) signal.
•
“INTERLEAVE”
Treats as Two-Sample Interleave Division (2SI) signal.
Function
F1
F2
F3
F4
F5
POP
Display Direction
Scan Size
Gamma Select
Color Gamut
Noise Reduction
Zoom
Undef
Sets functions assigned to function buttons.
•
“POP”
Switches the screen display between the dual screen (P
out P: a screen is split vertically) and the single screen.
•
“Display Direction”
Rotates / flips the screen.
•
“Scan Size”
Switches the setting values of “Window Config” - “Scan
Size” in sequence.
•
“Gamma Select”
Switches the setting values of “Video Config” - “Gamma”
in sequence.
•
“Color Gamut”
Changes the color gamut.
• “Noise Reduction”
Changes between the values “Video Config” and “Noise
Reduction”.
•
“Zoom”
Expands the current view on the display.
• “Undef”
No function assigned.
Status Display
Continue
3Sec
Off
Sets whether information about the current input signal and
terminal name is displayed.
Information about the resolution at the PC signal input is
also displayed.
Power On Setup
Last
PRESET1 to
PRESET5
FACTORY
USER1 to USER10
Settings for switching on can be set in advance.
• “Last”
Starts with last saved state.
•
“PRESET1 to PRESET5”
State saved in PRESET is called. Five types of
PRESET are stored in advance in the monitor as fixed
data.
•
“FACTORY”
Returns to factory settings.
•
“USER1 to USER10”
State saved in USER is called. It is possible to store 10
types of data in USER.
