- 33 -
Chapter 3
Advanced Adjustments/Settings
Function
Input Signal
(The setting range of each
function differs depending
on the input signal.)
√: Settable -: Not settable
Adjustable
range
Description
Note
DisplayPort
HDMI
PC
signal
Video
signal
HDMI
Settings
Noise
Reduction
-
√
√
On
Off
The small noises that occur in dark areas of an image are
reduced. Use this function to reduce noise and roughness in
images.
•
Using the Noise Reduction
function may lead to dete-
rioration of fine images.
Film
Detection
-
√
√
On
Off
The display method can be selected before the interlace signal
is displayed. Signals of 24 frames or 30 frames per second for
images such as movies, computer graphics, and animations
are automatically identified and the most suitable images are
displayed.
•
If distorted images are
displayed when “Film Detec-
tion” is “On”, set it to “Off”.
•
“Film Detection” is only
enabled during 1080i signal
input.
Safe Area
Marker
-
√
√
On
Off
The “safe area” is an area in which images can be displayed
on any display device.
When you set this function to “On”, this function displays the
safe area frame during for instance video editing, to enable
positioning while confirming at a glance that subtitles and
menu windows come within the safe area.
•
When the “Picture Setup”
setting in the “Administra-
tor Settings” menu is set to
“Dual”, the safe area frame
is displayed only when both
the left and right screens
are the same resolution.
Safe Area
Size
-
√
√
80% to 99%
The size of the safe area can be set.
-
Border
Color
-
√
√
White
Red
Green
Blue
Cyan
Magenta
Yellow
The color of the safe area frame can be set.
-
