Eizo ColorEdge CG275W, User Manual

Page: 7 / 64

7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 27.0″ wide format LCD
• Wide color gamut of 97% of Adobe RGB
• Applicable to the resolution of 2560 × 1440.
• IPS panel with 89˚ horizontal and vertical viewing angles
• Frame synchronization mode supported (23.75 - 30.5Hz, 47.5 - 61Hz)
• Applicable to Displayport / Mini DisplayPort (applicable to 8 bit or 10 bit)
• 3 signal input terminals (DVI-D × 1, DisplayPort × 1, Mini DisplayPort × 1)
• Color Mode function
- Reproduces a color gamut and gamma compliant with Adobe RGB, “EBU/REC709/SMPTE-C”
broadcasting standards, as well as “DCI” digital cinema standards.
See “To select the display mode (color mode)” (page 16) .
• Attaching the “Adjustment Certificate” to describe the grayscale and uniformity characteristics of the
monitor individually
• Portrait/Landscape display available (rotate 90˚ clockwise)
• Monitor hood attached
• The function indicator below the front buttons lights to improve operability in dark places.
See “3-7. Sets the brightness of the indicator “Indicator”” (page 25) .
• This product is equipped with a calibration sensor, and supports SelfCalibration in which the monitor
executes calibration independently.
See “Chapter 4 SelfCalibration” (page 29) .
• The provided “ColorNavigator” calibration software enables you to calibrate monitor characteristics and
generate color profiles
See “1-3. EIZO LCD Utility Disk” (page 10) .
• Supports Color Vision Deficiency Simulation Software “UniColor Pro”
This software can be downloaded from our web site ( http://www.eizo.com ).
• Power saving function
Suppressing the power consumption reduces the carbon dioxide emissions. This product is equipped with power
saving function.
- Power Consumption when main power switch is Off: 0 W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
- EcoView Sense function
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,
the function reduces the power consumption.
See
“5-2. Setting the power saving mode when a person leaves the monitor “EcoView Sense”” (page 35) .
• HDCP (High-bandwidth Digital Content Interface)