- 8 -
Chapter 1
Introduction
•
This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the monitor executes calibration independently.
See
•
The provided Color Management Software “ColorNavigator 6” enables you to calibrate monitor characteristics and generate color profiles
See
“1-3. EIZO LCD Utility Disk” (page 11)
•
Equipped with 4K zoom function
If a 4K2K signal (signals with a resolution of 4096 × 2160 or 3840 × 2160) is displayed on the screen, the specified area can be expanded by 2x in the display.
This is convenient when checking the fine detail of photos. This is convenient when checking the fine detail of images.
“2-4. Enlarging Images” (page 20)
•
Equipped with a USB Hub function that supports USB 3.0
Achieves high-speed data transfers of up to 5 Gbps, which enables transfers of large amounts of data to and from USB-connected devices in a short amount time.
Also, the “CHARGE” USB downstream port supports quick charging, so you can recharge your smartphone or tablet in a short period of time.
“6-4. Making Use of USB (Universal Serial Bus)” (page 55)
•
Monitor hood is included
Includes a monitor hood that can effectively shield the monitor from the reflection of external lighting, such as the reflected glare of a fluorescent light.
•
Displays HDCP (High Bandwidth Digital Protection)
*5
protected contents.
*5
Supports HDCP Version 1.2
Attention
Be careful of the following points when using the built-in calibration sensor.
Do not touch the built-in calibration sensor.
It may reduce the measurement accuracy of the built-in calibration sensor, or result in injury or equipment damage.
Attention
•
A high temperature or high humidity environment may affect the measurement accuracy of the built-in calibration sensor. We suggest storing and using the monitor under the
following conditions.
-
Temperature 30 ºC or less
-
Humidity 70% or less
Avoid storing or using the sensor where it may be exposed to direct sunlight.
•
Since the measurement result for the built-in sensor may be affected, ensure that the level of ambient light that enters the receiver part of the built-in sensor does not change
significantly during measuring.
-
The use of the monitor hood is recommended.
-
While measuring, do not bring your face or any objects close to the monitor, do not look into the sensor.
-
Set the monitor in the environment so that external light does not enter the sensor directly.
