- 7 -
Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
•
24.0″ widescreen
•
Wide color gamut display (Adobe
®
RGB coverage: 99%)
•
Achieves contrast ratio of 1500:1
*1
A high contrast ratio allows display of crisper black with reduced whiteness.
*1 (typical) When “DUE Priority” is set to “Brightness”
•
Supports a resolution of 1920 × 1200
•
IPS panel with 89˚ horizontal and vertical wide viewing angles
•
The time from switching on the monitor until the display is stable has been shortened to approximately 3 minutes
*2
*2 According to EIZO measurement conditions. However, if performing SelfCalibration (
), it is necessary to wait at least 30 minutes after turning on the power, in
order to obtain correct measurement results.
•
Frame synchronization mode supported (23.75 – 30.5 Hz, 47.5 – 61.0 Hz)
•
Support for three digital signal inputs (DVI-D × 1, HDMI × 1, DisplayPort × 1)
- DisplayPort connector (applicable to 8 bit and 10 bit)
*3
- HDMI connector (applicable to 8 bit, 10 bit, and 12 bit)
*3,*4
Can handle PC signals in HDMI input
*3 Not applicable to audio signals.
*4 10 bit and 12 bit are supported only when using HDMI-Video. The maximum screen display is 10 bits.
•
Color mode function
Reproduces a color temperature, gamma, and gamut compliant with the following standards.
- Adobe
®
RGB / sRGB
See
“Chapter 3 Advanced Adjustments/Settings” (page 19)
•
Stand with wide range of movement
The monitor can be adjusted to a position where it provides you with a comfortable and less tiring work environment.
(Tilt: up 35˚/down 5˚, Swivel: 344˚, Adjustable height: 145 mm (Tilt: 35°), 155 mm (Tilt: 0°))
•
This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the monitor executes calibration independently.
See
•
The provided Color Management Software “ColorNavigator 6” enables you to calibrate monitor characteristics and generate color profiles
