15.The <Smoothing> cannot
be selected.
[ ] <Smoothing> is disabled when the screen is
displayed in the 1280 x 1024.
[ ] <Smoothing> is disabled when "Normal" is
selected in the <Screen Size> menu.
[ ] The image size is doubled both in
horizontally and vertically to (i.e. 1280 x 960
enlarged from 640 x 480) provide clear focus
which does not require this function.
16.The Main menu of
ScreenManager does not
operate.
[ ] The adjustment lock is probably on.
: switch the LCD monitor off. Then,
while pressing the Autadjustment button
switch, the power on.
17.The Auto adjustment
button does not operate.
[ ] The adjustment lock is probably on. To
unlock: switch the LCD monitor off. Then,
while pressing the Auto adjustment button,
switch the power on.
18.Frequency does not
change after installing
"Monitor information file"
in the attached utility disk
on Windows 98/Me/2000/
XP.
[ ] Use the graphics board's utility software to
change the input signal frequency.
19.USB function cannot be
setup.
[ ] Check that the USB cable is correctly
connected.
[ ] Check that the PC and OS are USB
compliant. (For verification of USB support,
consult the manufacturer of each system.)
[ ] Check the PC's BIOS setting for USB. ( For
details, refer to the manual of the PC.)
20.PC is hung up. / The
peripherals connected to
the downstream ports do
not operate.
[ ] Check that the USB cable is correctly
connected.
[ ] Check the downstream ports by connecting
the peripherals to other downstream ports. If
the problem is solved by doing this, contact
an EIZO dealer. (For details, refer to the
manual of the PC.)
Summary of Contents for ColorEdge CG19
Page 34: ...1 Select Input Signal in the Others menu 2 Select Manual...
Page 65: ......
