EIP Limited AF5100, Owner'S Manual

Page: 3 / 8

AF5100 OWNERS MANUAL
3
IMPORTANT
READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
1. Product Information
These machines are designed for the drying carpets,
hard floors and other interior areas. They can also be
used to ventilate and cool areas. They should not be
used in outdoor areas.
The following instructions contain important information
about the machines and safety advice for the operator.
Equipment must be operated, serviced and maintained in
accordance with the manufacturer’s instructions.
If in doubt contact the supplier of your machine.
1.1 Important Safety Advice
When using electrical equipment basic safety precautions
should be adhered to including the following:
•
Read all instructions carefully before use.
•
Use only as described in this manual.
•
Only use manufacturer’s recommended components
and attachments.
•
Do not handle plug or appliance with wet hands.
•
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, debris and
anything that may reduce airflow.
•
Do not cover machine when in use.
•
Keep children and unauthorized persons away from the
machine when in use.
•
Do not leave the machine connected to the electricity
supply when not in use, always remove the plug from
the socket-outlet.
•
Switch off the machine before removing the plug.
•
When unplugging pull the plug, not the supply cord.
•
Do not pull or carry by supply cord. Do not use cord as
handle, close door on cord or pull cord around sharp
edges or corners.
•
Keep cord away from heated surfaces.
•
Do not operate the machine with a damaged supply
cord or plug, or after the machine malfunctions or is
damaged in any way. Contact an authorized Service
Agent for repair or adjustment.
•
The plug of the power supply cord must be removed
from the socket-outlet before commencing cleaning of
the machine or undertaking maintenance operations.
•
The power supply cord must be regularly inspected for
signs of damage. If the power supply cord is damaged,
it has to be replaced.
•
Do not use where hazardous dust is present.
•
Do not use near flammable fluids, dust or vapours.
•
Do not use in an explosive atmosphere.
•
Take care when using a machine near the top of stairs
to avoid overbalancing.
•
Warning: do not stack dryers more than two units high
without tie-downs.
1.2 Guidelines for the operator
•
Operators must be fully trained in the use of machine in
accordance with these instructions, able to perform
user maintenance and the correct selection of
accessories.
•
Operators should be physically capable to manoeuvre,
transport and operate the machines.
•
Keep machine clean and in good operating condition.
•
Operators should be able to recognize unusual
operation of the machine and report any problems.
•
Wear suitable footwear to avoid slipping.
•
Wear suitable clothing to keep dry and warm.
•
Do not smoke when using the machine.
•
CAUTION – For indoor use only. Do not use outdoors
or expose to rain.
1.3 Transporting the machine
Carry the machine by the handle
CAUTION – THIS MACHINE IS HEAVY
Incorrect lifting techniques may result in personal injury.
2. Preparing for use
2.1 Electrical connection
Before connecting the machine to the power supply,
check that your supply voltage corresponds with that
marked on the rating label on the machine.
The power supply cord plus any extension leads should
not exceed 30m in total. The cross-section of any
extension cable wiring must be at least 2.5mm².
The supply cord for 230v models is fitted with a plug
containing a 13 amp fuse. Should the fuse require
replacement it must only be replaced by a 13 amp fuse
conforming to BS1362, and the fuse cover must be
refitted. If the fuse cover is lost, the plug must not be
used until the correct replacement cover is fitted.
MPORTANT
– If the supply cord is damaged, it must only
be replaced by a suitable cord available from the
manufacturer or and authorized service agent.
WARNING – THIS APPLIANCE MUST BE EARTHED
3.Controls
The operating switch is located on the side.
Low speed – move switch to position ’I’
High speed – move switch to position ‘II’
WARNING
– Only use accessories or spares specifically
designed for use with this appliance. The fitting of other
accessories or spares may affect its performance and
safety.