EINHELL TE-SW 18/610 Li-Solo, Original Operating Instructions

Page: 21 / 130

GB
- 21 -
6.3 Emptying the debris collector (Fig. 14)
Warning! Dust can pose a health hazard. Wear a
breathing mask.
Warning! Wear strong gloves to protect yourself
against injury from things like fragments of glass.
Take the debris collector (8) out of the equipment
as shown in Fig. 14. Empty the debris collector
and fi t it back into the equipment again after-
wards.
6.4 Parking position (Fig. 15)
The equipment can be folded down for storing in
minimum space. To do so, undo the nuts with the
quick clamping function (11) until the pins (Fig. 6,
Item A) jump out of the fastener and then fold the
push bar back. The equipment can then be put in
the parking position (Fig. 15)
7. Cleaning, maintenance and
ordering of spare parts
Hazard!
Always pull out the battery pack before starting
any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
7.2 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o ffi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original pa-
ckaging.
Anl_TE_SW_18_610_SPK9.indb 21 Anl_TE_SW_18_610_SPK9.indb 21 07.04.2020 11:07:07 07.04.2020 11:07:07