EN
- 12 -
•
Cordless Planer
•
Step depth scale
•
Parallel stop
•
Wrench
•
Original operating instruction with safety in-
formation
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.5Ah P-X-C lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V 4-6 Multi Ah P-X-C Plus lithium-ion battery
18V P-X-C Dual Port Fast Charger
18V P-X-C Fast Charger
Explore b charger options at
einhellUSA.com
3. Intended use
The cordless planer is designed for planing, reba-
ting and chamfering pieces of wood.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................18 V
No-load speed: ....................... 15.000 rpm (min
-1
)
Planing width:............................... 3
1
/
4
in. (83 mm)
Planing depth: ..................
1
/
64
in. to
5
/
64
(0.4-2 mm)
Maximum rabbet depth: ..................
5
/
16
in. (8 mm)
Weight (Tool only): ........................5.3 lbs (2.4 kg)
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The fol-
lowing hazards may arise in connection with
the equipment‘s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is applied.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a longer
period or is not properly guided and maintai-
ned.
Limit the operating time.
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched o
ff
and times in which the tool is
switched on but operates without load).
5. Before starting the equipment
Warning!
Always remove the battery before making adjust-
ments to the tool.
5.1 Adjusting the chip depth (Fig. 3/Item 1)
You can adjust the chip depth in steps of
1
/
64
in. to
5
/
64
in. (0.4-2 mm) by turning the setting knob for
the chip depth (1) .
Turn the setting knob for the chip depth (1) clock-
wise: the chip depth will increase
Turn the setting knob for the chip depth (1) coun-
ter-clockwise: the chip depth will decrease
After
fi
nishing your work, set the chip depth so
that the knives are lowered and therefore protec-
ted from damage. Turn the setting knob for the
Anl_TE_PL_18_82_Li_SPK7_USA.indb 12
Anl_TE_PL_18_82_Li_SPK7_USA.indb 12
31.03.2021 13:53:02
31.03.2021 13:53:02
