EINHELL GC-ET 4025, Original Operating Instructions

Page: 16 / 120

GB GB
- 16 -
Table of contents
1. Safety regulations
2. Layout and items supplied
3. Proper use
4. Technical data
5. Before starting the equipment
6. Operation
7. Replacing the power cable
8. Cleaning, maintenance and ordering of spare parts
9. Disposal and recycling
10. Storage
11. Troubleshooting
m
Important!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
m
Caution!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the warning signs on the ma-
chine (see Fig. 13)
A Warning!
B Read the instruction manual before starting!
C Wear eye protection and ear plugs!
D Protect from moisture!
E Pull out the mains plug before checking a
damaged power cable!
F Keep other people out of the danger area!
G The equipment continues to rotate!
H Caution: Sharp blade! Keep your hands away.
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Power cable
2. Upper handle
3. On/Off switch
4. Additional handle
5. Lock for additional handle
6. Lock for handlebar height adjustment
7. Top handlebar
8. Bottom handlebar
9. Distance bracket
10. Lock for rotatable motor head
11. Line spool
12. Guard hood
Anl_GC_ET_4025_4526_SPK7.indb 16 18.12.13 11:40