10
GB
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1.
Handle
2. Locking
button
3. ON/OFF
switch
4. Allen
key
5. Power
cable
6. Blade
holder
7. Adjustable
soleplate
8. Safety
guard
9. Dial scale for soleplate
10. Guide roller
11. Screw for soleplate
12. Saw blade
3. Proper use
The jigsaw is designed for sawing wood, iron, non-
ferrous metals and plastics using the appropriate saw
blades.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
230 V~ 50 Hz
Power input:
350 W
Stroke speed:
3,000 min
-1
Stroke height:
17 mm
Cutting depth, wood:
55 mm
Cutting depth, plastic:
10 mm
Cutting depth, iron:
3 mm
Miter cut:
up to 45° (left and right)
Protection class:
II /
쓑
Weight: 1.1
kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
72 dB(A)
K
pA
uncertainty 3
dB
L
WA
sound power level
83 dB(A)
K
WA
uncertainty 3
dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values determined in accordance with
EN 60745.
Cutting wood
Vibration emission value a
h
≤ 2,5 m/s
2
K uncertainty ≤ 0,3 m/s
2
Cutting sheet metal
Vibration emission value a
h
≤ 2,5 m/s
2
K uncertainty ≤ 0,3 m/s
2
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
Anleitung_BJS_400_SPK1__ 09.04.13 12:55 Seite 10
