background image

GB

- 13 -

 

 For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EU concerning old electric and electronic equipment and 

its implementation in national laws, old electric power tools have to be separated from other waste and 

disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment 

must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. 

The old equipment can be returned to a suitable collection point that will dispose of the equipment in 

accordance with the national recycling and waste disposal regulations. This does not apply to any ac-

cessories or aids without electrical components supplied with the old equipment.

 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers 

accompanying products is permitted only with the express consent of the iSC GmbH. 

 Subject to technical changes.

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this consignment is not subject to the ADR regulations. Handle 

with care. Danger of ignition in case of damage to the consignment package. If the consignment packa-

ge is damaged: Check and if necessary repackage. 

For further information contact: 0049 9951 95920-66. Outside Germany charges will apply instead for a 

regular call to a landline number in Germany.

Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb   13

Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb   13

09.06.2020   12:55:46

09.06.2020   12:55:46

Summary of Contents for 45.137.96



















Reviews: