GB
- 13 -
The compressed air hose is also
fi
tted with a
quicklock coupling to which accessories can be
connected as described above.
5. Instructions for the 3-piece
accessory set
For information on the correct use of the accesso-
ries, please refer to the following overview.
•
Compressed air hose
For connecting to a compressed air source.
•
Blow-out pistol (Figure 1)
Working pressure in bar: 3-8
Range of applications:
For cleaning and blowing out hollow spaces or
hard-to-reach areas, as well as for cleaning
soiled equipment.
The in
fi
nitely variable trigger lever allows an
exact dosing of compressed air.
•
Tire pressure gauge (Figure 2)
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to in
fl
ate tires
easily and exactly. Use the pressure gauge to
check the tire pressure.
If the tire pressure is too high, you can reduce the
pressure with the integrated relief valve (b).
6. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before
starting any cleaning work.
6.1 Cleaning
•
We recommend that you clean the appliance
immediately after you use it.
•
Clean the accessories after use with a
suitable cleaning agent.
6.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
6.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
7. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
8. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Anl_Druckluftset_3_tlg_Kit_SPK9.indb 13
Anl_Druckluftset_3_tlg_Kit_SPK9.indb 13
27.03.2018 09:25:23
27.03.2018 09:25:23
