EN
- 9 -
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more speci
fi
c
models of batteries and charger available in your
area. You can also explore b charger
options at Einhell.com.
3. Intended use
The cordless blower is designed for use in the
workshed for removing dust and particles of dirt
or making them into piles in areas which are hard
to reach.
It can also be used for pumping air into objects
such as air mattresses or similar using the
attachable nozzles (5) included in delivery.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................18 V
No load speed setting 1: .... 0-11500 RPM (min
-1
)
No load speed setting 2: ..... 0-15500 RPM (min
-1
)
Blow speed setting 1: ..............81 mph (130 km/h)
Blow speed setting 2: ............112 mph (180 km/h)
Weight: .............................................2.2 lbs (1 kg)
Wear ear-mu
ff
s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment‘s con-struction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
5. Before starting the equipment
5.1 Fitting the blower tube (Fig. 2)
Connect the motor unit (3) and blower tube (1)
together (Fig. 2). To secure the blower tube, turn it
clockwise until it clicks into position (Fig. 2).
5.2 Fitting the nozzles (Fig. 3)
Fit the attachable nozzles (5) in the same way as
the blower tube (1). To do so, remove the blower
tube (1) from the motor unit (3) and then
fi
t the
attachable nozzles (5). You will have to use a
di
ff
erent nozzle according to the type of valve.
6. Operation
6.1 On/O
ff
switch (Fig. 1/pos. 2)
Switching on:
To switch on, press and hold the On/O
ff
switch
(2).
Switching o
ff
:
Release the On/O
ff
switch (2)
Anl_TE_CB_18_180_Li_SPK7_USA.indb 9
Anl_TE_CB_18_180_Li_SPK7_USA.indb 9
02.05.2022 15:39:17
02.05.2022 15:39:17
