EINHELL 34.242.01 Original Operating Instructions Download Page 23

Page: 23 / 74

- 23 -

for suitability on an inconspicuous area

rst

before using it each time. Di

ﬀ

erent brushes for

ﬀ

erent surfaces are available as separate ac-

cessories. Only use water without any additives

whatsoever.

The

MEDIUM

nylon brush (black) is speci

cally suitable for cleaning unsealed paver and

stone surfaces. It can therefore also be used for

cleaning surfaces which are paved with paving

stones/concrete blocks or concreted surfaces

(e.g. driveways, decks, paths). The side brush can

be used for cleaning perimeters and bases.

Using the

SOFT

nylon brush (yellow/green) the

equipment can also be used for cleaning wood,

composite materials (BPC/WPC) or for brushing

(e.g.

attened areas) arti

cial turf to raise it up-

right, as used in the private domain where it is

installed, for example, on balconies or decks.

The

ULTRA

metal brush can be used for cleaning

robust surfaces such as, e.g. paving stones/

concrete blocks, concreted surfaces, granite or

porphyry to remove stubborn dirt.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a

case of misuse. The user / operator and not the

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Caution!

Residual risks

Even if you use this electric power tool in

accordance with instructions, certain resi-

dual risks cannot be rules out. The following

hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

4. Injury and damage to property caused by

ing parts.

Limit the operating time.

All stages of the operating cycle must be conside-

red (for example, times in which the electric tools

are switched o

ﬀ

and times in which the tool is

switched on but operates without load).

Danger!

This electric power tool generates an electro-

magnetic

eld during operation. Under certain

circumstances this

eld may actively or passively

impede medical implants. To reduce the risk of

serious or fatal injuries, we recommend persons

with medical implants to consult their doctor and

the manufacturer of the medical implant prior to

using the equipment.

4. Technical data

Voltage ....................................................18 V d.c.
Speed n0 ...................................... 800-1400 rpm
Brush diameter ...................................... 115 mm
Protection class .................................................III
Sound power level LWA ..................... 94,6 dB(A)
Uncertainty K ........................................ 3 dB (A)
Vibration ah .......................................... 2,13 m/s²
Uncertainty K ..........................................1.5 m/s

Weight ....................................................... 4,1 kg
Sound pressure level LpA at the operator‘s ear ...

........................................................... 83,8 dB (A)
Uncertainty K ........................................ 3 dB (A)
Max. water inlet pressure ............0.6 MPa (6 bar)

Important!

The equipment is supplied without batteries and

without a charger and is allowed to be used only

with the lithium-ion batteries of the Power-X-

Change series!

The lithium-ion batteries of the Power-X-Change

series are allowed to be charged only with the

Power-X charger.

The machine noise might exceed 85 dB (A). The

operator will require noise protection measures if

this is the case.

Important!