EINHELL 34.105.91, Directions For Use Manual

Page: 13 / 44

GB
13
9/item 1). Re-fasten the grass cutting blade with the
screws.
9. Maintenance and cleaning
To achieve good results you should keep the blades
sharp at all times. In particular we recommend that
you immediately level off any jags or ridges caused
by stones or the like. The tool should be thoroughly
cleaned both before and after use. A few drops of oil
(e.g. sewing machine oil) will improve the cutting
performance of the blades, but never apply any
grease to the blades. To ensure constant exact
cutting it is also important to remove grass remnants
and dirt from between the upper and lower blade.
Important!
Never clean the tool under running water - and
particularly never with high pressure - because
of the potential danger to persons and property.
Keep your cordless grass cutter and hedge
trimmer in a dry and frost-proof place. Choose a
place that children are unable to enter.
10. Troubleshooting
The tool does not cut cleanly:
Check the blades and replace them if necessary.
In case of any other faults, please contact the ISC
Customer Service Center.
We draw express attention to the fact that we are
not responsible within the meaning of the
Product Liability Law for any damage caused by
our products if said damage results from
incorrect repair or the use of replacement parts
which are not original Einhell parts or parts
approved by us and the repair is not carried out
by the ISC Customer Service Centre.
Anleitung AGSS 18 11.11.2003 10:22 Uhr Seite 13