EN
- 8 -
3. Intended use
The cordless wet/dry vacuum is designed for wet
and dry vacuuming using the appropriate
fi
lter.
The equipment is not suitable for the vacuuming
of combustible, explosive or harmful substances.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................18 V
Air
fl
ow: .............................. 53 CFM (1.5 m³/min)
Vacuum pressure max.: .............................. 8 kPa
Vacuum hose length: ....................... 4.9 ft (1.5 m)
Tank capacity: .............................. 5 Gallon (20 l )
Weight: .........................................7.9 lbs (3.6 kg)
5. Before starting the equipment
5.1 Assembling the equipment
Fitting the head (Fig. 1,3,4)
The equipment head (3) is fastened to the
tank (7) by the locking hook (6). To remove the
equipment head (3), open the locking hook (6)
and take o
ff
the equipment head (3). When
fi
tting
the equipment head (3), make sure that the
locking hook (6) locks into place correctly.
Fitting the castors (Fig. 5)
Fit the castors (13) into the appropriate mountings
on the underside of the tank (7).
5.2 Fitting the
fi
lters
Important!
Never use the wet/dry vacuum without a
fi
lter.
Always ensure that the
fi
lters are securely seated.
Fitting the foam
fi
lter (Fig. 6/Item 15)
For wet-vacuuming, slip the supplied foamed
plastic
fi
lter (15) over the
fi
lter basket (Figs. 3/4).
Fitting the pleated
fi
lter (Fig. 7)
For dry-vacuuming, slip the pleated
fi
lter (Fig. 18)
onto the
fi
lter basket (Fig. 4/Item 4) and secure
in place by rotating clockwise until the locking
knobs connect. The pleated
fi
lter is suitable for
dry-vacuuming only.
Fitting the dust bag (Fig. 9/Item 14)
For vacuuming
fi
ne dry dust, it is recommended
that you
fi
t the dust bag. (Fig. 2/Item 14). Slip
the dust bag (14) over the vacuuming hole. The
dust bag (14) is suitable for dry-vacuuming only.
The dust bag makes it easier to dispose of the
sucked-in dust.
5.3 Fitting the suction hose (Fig. 3, 10, 11)
Connect the suction hose (10) to the
corresponding connector on the wet/dry vacuum,
depending on the application required.
Vacuuming
Connect the suction hose (10) to the suction hose
connector (8).
Blowing
Connect the suction hose (10) to the blow
connector (9).
To extend the suction hose (10) you can attach
one or more of the elements which make up the
3-part suction tube (11) to the suction hose (10).
The adapter (17) must be inserted between the
suction tube (11) and the combination nozzle (12)
or crevice nozzle (16).
5.4 Suction nozzles
Combination nozzle (Fig. 2)
The dual-purpose nozzle (12) is for vacuuming
solids and liquids over medium to large areas.
Crevice nozzle (Fig. 2)
The crevice nozzle (16) is designed for
vacuuming solids and liquids in corners, edges
and other areas that are di
ffi
cult to access.
Upholstery nozzle (Fig. 2)
The upholstery nozzle (22) is specially designed
for vacuuming solids on upholstery and carpets.
Fitting the tool adapter
You can use the supplied tool adapter (Fig. 2/
Item 24) to connect the suction hose (10) to the
tool. To do so,
fi
t it between the suction hose
and the extractor port on the tool. Check that the
connections are secure and air-tight.
Anl_TC_VC_18_20_Li_S_USA_SPK7.indb 8
Anl_TC_VC_18_20_Li_S_USA_SPK7.indb 8
13.04.2022 13:59:14
13.04.2022 13:59:14
