A
B
7
GB
Rotary switch set for drilling mode.
Wait for the
drill to stop before changing!
Please note:
This switch should be
in ‘drill’ position when drilling holes in tiles.
Rotary switch set for hammer mode.
Wait for
the drill to stop before changing!
On/Off switch:
To switch on:
Press switch A
Continuous operation:
Lock switch A with
locking button B
To switch off:
Press switch A briefly
The speed is varied by applying more or less
pressure on switch A. You can preselect the
speed by turning the knurled screw in switch A.
Anleitung BSM 550_1 SPK1 17.09.2004 9:43 Uhr Seite 7
