12
1. Remove unit from packaging and remove two screws on backside. Unplug
plastic supports and remove U-shaped metal clips from both sides of the
bracket to separate plastic rings.
Installation
2. Raise the car headrest and choose the appropriate plastic ring that best fits the
diameter of the headrest supports. Place the two parts of the plastic ring securely
around the headrest supports and fix them in place using the U-shaped metal clips.
3. Place the plastic bracket in between the two U-shaped metal clips and insert
the clips firmly into the holes on each side of the plastic bracket. Adjust the plastic
bracket so that it is centered between the two headrest supports.
4. Hold the DVD unit in place and insert the metal plate on the back of the unit into
the plastic bracket. Adjust DVD unit to the desired angle, then fix it securely.
Finally, lower the car headrest to its original position.
