6
INTRODUCTION
Thank you for choosing this Eikon product and for your trust in our brand, synonymous of professionalism,
accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in
professional systems.
DESCRIPTION
The WM101 Wireless Microphones series is a UHF, quartz controlled, fixed frequency device, which provides
a reliable, high quality signal transmission.
WM101 Wireless Microphone system features 3 units: WM10D receiver, WM11M handheld transmitter and
WM11B body pack transmitter. The system is available in two different configurations:
WM101DM
: 2 x WM11M
WM101DH
:
2 x WM11B + 2 x Headset
One factory pre-build frequencies are available, which have been selected to allow the simultaneous use
without interference between them (depending on the circumstances):
1.
863.100 MHz
2.
864.850 MHz
WM101D RECEIVER
See FIG. 1 at page 15:
1.
DC IN
Socket for the AC/DC adaptor connection, use only the adaptor supplied with the system.
2.
AUDIO OUT (UNBALANCED)
Unbalanced audio output with line level: connect it through a mono 6.3mm jack cable to a mixer input.
3.
PWR / VOLUME
On/off switch and volume potentiometer: set this control to a proper
level that doesn’t
saturate the
mixer input channel.
4.
ON
Red LED: if lighted states that the power supply is present and the receiver is turned on.
5.
RF
Green LED: if lighted states that the transmitter is sending a radio signal to the receiver.
6.
AF
Yellow LED: illuminates when an audio signal is present.
7.
ANTENNA
This is the receiving antennas. Raise it up during the use and, to obtain a better reception, place the
receiver away from other metal objects and no more distant than 25m from the transmitter.
8.
RECEIVING FREQUENCY
In this led screen , you can find the receiving radio frequency.
Each radio apparatus must correspond to the frequency of the wireless transmitter that will be used.
