Eiki LC-XT1, Owner'S Instruction Manual

Page: 33 / 51

LC-XT1
.
‘-‘C’’
The AUTO IMAGE function cannot be operated when the input signal is digital from DVI terminal or “RGB”, “480p”,
‘575p”, “HDTV72Op”, “HDTV1O35i” or “HDTV1O8Oi” is selected on the SYSTEM SELECT menu.
Press the AUTO IMAGE button on the Side Control or on the Remote Control Unit to automatically adjust Fine sync.,
Total dots and Screen position for most computers. It will take about 10 seconds.
NOTE: Some computers may not be fully adjusted with the “Auto Image Function”. In that case, use the “Picture Image”
and/or “Picture Position” adjustments (P32, 33) to make fine-adjust then after the “Auto Image Function” is
executed.