30
DISPLAY ADJUST
MANUAL DISPLAY ADJUSTMENTS
This projector can automatically tune to display signals from most computers and video equipments currently distributed.
However, some computers and video equipments employ special signal formats which are different from standard ones and
may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and
image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.
This projector has a Manual display adjustment to enable you to precisely adjust several parameters to match with those
special signal formats.
This projector has 20 independent memory areas {Mode 1~15 for video equipments and computers (digital signal), Mode 16
~ 20 for computers (analog signal)} to memorize those parameters manually adjusted. This enables you to recall setting for a
specific computer and video equipment whenever you use it.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to PC
ADJUST Menu icon.
1
2
Press POINT UP/DOWN button to move a red frame pointer to
item that you want to adjust and then press SELECT button.
Adjustment dialog box will appear. Press POINT LEFT/RIGHT
button to adjust value.
Adjusts an image as necessary to eliminate flicker from display.
Press POINT LEFT/RIGHT button to adjust value. (From 0 to 31.)
Fine sync
Adjust the number of total dots in one horizontal period. Press
POINT LEFT/RIGHT button(s) and adjust number to match your PC
image.
Total dots
Adjusts horizontal picture position. Press POINT LEFT/RIGHT
button(s) to adjust position.
Horizontal
Adjusts vertical picture position. Press POINT LEFT/RIGHT button(s)
to adjust position.
Vertical
Shows status
(Stored / Free) of
selected Mode.
Selected Mode
DISPLAY ADJUST MENU
DISPLAY ADJUST Menu icon
Move a red frame icon to item and
press SELECT button.
Press POINT LEFT/RIGHT
button to adjust value.
Press SELECT button at this icon to
display next items.
Selects area displayed with this projector. Select resolution at
Display area dialog box.
Display area
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SELECT button.
Display area H
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SELECT button.
Display area V
Display area
Press SELECT button at
Display area icon and Display
area dialog box appears.
Press SELECT button at this
icon to display previous items.
Press POINT LEFT/RIGHT
button to adjust value.
